It is always possible to take any old oversized t-shirts and make beautiful women's T-shirts, not to mention that the final look is unique. Some of the procedures include the following steps that lead to the final appearance and fitting of the T-shirt. If you went through. Here is the step-by-step guide.
Choosing the Right T-Shirt
The process begins with choosing the actual men’s T-shirt, that you would like to recycle. You should also make sure to select a shirt size that is slightly larger than the usual size, this is because more fabric is allowed. Therefore, it is recommended to have a flexible shirt made of delicate fabric that will fit nicely on the body. Iron and wash the T-shirt to shrink the fabric and, therefore, avoid further shrinkage after the alterations have been done. Place the T-shirt flat on a clean surface that has a hard surface to make sure that the cutting is accurate.
Marking the New Shape
In this step, fabric chalk or washable marker should be applied to draw the new T-shirt cut in detail. To take measurements on the shoulder, one must measure the required width from one end of the shoulder seam to the other end of the shoulder seam on the shirt. For the sides, if you want a more boxy look, simply draw straight lines, or if you want a more fitted look measure the bust, waist, and hips. These are the measurements to mark on the shirt and join the points with a neat curved line. This will inform the exact length of the shirt that the designer intends to develop. If you desire a cropped fit, then you need to take the b from the shoulder to the required length and place the mark on both sides. Next, go half an inch up from the bottom of the shirt and draw a straight line at this point.
Cutting the Fabric
Sew along the marked lines and trim as close to the line as possible to remove the shoulder and side fabric. If you are coming up with a new neckline, you should also mark and cut it. Possible choices may include a scoop neck, V-neck, or off-shoulder style of the dress. Always make smooth and equal cuts and do it gradually to get neat edges as desired.
Sewing the New Seams
Fold and sew the sides of the T-shirt on the separate parts tracing the lines that you’ve previously made. There are various ways of doing this depending on the skill level, the materials, and the sewing tools available; however, employing the sewing machine or needle with thread, sew up to the pinned parts to develop the new side seams. In this case, try using a zigzag stitch because the stretchable fabric will require some flexibility in sewing. Join the shoulder seams and other neckline slits that you have added, finishing it with a neat stitch so that it does not fray. For the ends, if you would like your clothing to have a somewhat relaxed feel, the edges can remain unfinished.
Tips and Tricks
Sew a fit tester on an old T-shirt if you have not sewn on knits before or if you are not sure where your knitting garments will fit. Ensure that you use the right measurements because there is always a tendency to make mistakes. In comparison with using a blade for cutting, a rotary cutter provides straighter and cleaner cuts; most convenient for the sides and the hem of the garment. That way, you will be able to turn a men’s T-shirt into a trendy stylish, and well-fitting top for the woman. As well as this process saves money and enables people to express themselves and their style and taste when choosing mens clothing brands in Pakistan. Happy with your new T-shirt that has been made to fit you perfectly.
